Jabsco - Commercial-Duty Water Puppy

SKU#6966 | Mfg#18660-0121
Call for Price: 800-627-4327
Call for better price incase of bulk and over weight orders

$189.95

Bronze Flexible Impeller pump with a Nitrile Impeller, Lip Type seal, 1/2 Inch NPT Internal and 1 Inch Hose Barb Ports, coupled to a 12 Volt DC, CE rated Motor. This pump has a nominal flow rate of...Read More

Clear selections

View Full Details

Specifications
Product Name: Jabsco - Commercial-Duty Water Puppy
Product ID: 11400023
Brand:Jabsco
Unit Of Measure:Each
Specifications:The Package Height Of The Product Is 4.3 Inches The Package Length Of The Product Is 9.8 Inches The Package Width Of The Package Is 5.6 Inches
Weight:5.80 lb

Overview

Bronze Flexible Impeller pump with a Nitrile Impeller, Lip Type seal, 1/2 Inch NPT Internal and 1 Inch Hose Barb Ports, coupled to a 12 Volt DC, CE rated Motor. This pump has a nominal flow rate of 8 GPM (30.4 LPM), and is self-priming from dry up to 6 feet (2m) and a lift to 20 feet (6m) when primed. Be sure suction lines are airtight or pump will not self-prime. This workhorse is designed for general transfer pumping where self-priming and debris tolerance are required. This unit depends on liquid pumped for lubrication. Do Not Run Dry for more than 30 seconds. Lack of liquid will damage the impeller and the pump components. The pump ports have external 1 Inch hose barb and internal 1/2 Inch pipe threads. Also provided are two male port adapters to allow the attachment of 3/4 Inch female garden hose fittings. The pump cannot run against a closed outlet such as encountered when using a garden hose type shut-off nozzle. Pressure for normal operation should not exceed 20 feet of head (8.7 psi). Temperature of pumped liquid may be in the range of 45 degrees - 180 degrees F (7 degrees - 82 degrees C).

Reviews

0 reviews

Write a Review

Returns

Returns are not accepted for this product.

Top of Page